All of the builders' exterior clay brick selections. There is an option for stone accents or exteriors. • As per the drawings, highlights in stucco or board & batten. • Equivalent or low-maintenance fiberglass columns (front elevation only where applicable as per plan). • A brick column from a typical builder's sample can be seen on the front elevation of modern elevations (only where applicable as per plan). • Has an aluminium soffit, fascia, and eaves that require no maintenance. • There is fine detail throughout. PAINT, DRYWALL, & INSULATION • R60 blown insulation in the attic, R20 + R5 in exterior walls. • For comfort and efficiency, the basement should be insulated with R20 6" above floor level and a vapour barrier. • An external air barrier system for a draft-free home with taped seams and openings. • The garage and all drywall construction. to all ceilings

Project Facts

Features & Finishes

High-performance furnace with a two-stage motor rated at 95% efficiency. 90% EF high-efficiency hot water unit (rental). • All lighting will be LED to further reduce costs. improved coil for a 14.3 seer rating on the air conditioner. Lot graded according to a municipal grading plan with full sodding. • A tree in front of each home, 8" high, poured-in-place reinforced 20Mpa concrete foundation wall system with keyed-in reinforced concrete footing 7'10" high; a full inground watering system for the front and back yards; Optional taller basement walls for lower-level ceilings with grander heights. • For a dry basement, all outside foundation walls should have damp-proofing sprayed on them with a drainage layer waterproofing membrane. • All frameworks must comply with or exceed Ontario Building Code. • All flooring is kiln-dried quality lumber.